How to prevent the spread of disease in my home?

Result of the continuing development of its products and its commitment to innovation,Sherwin Williams has created the new Latex High Length Bioprotect, incorporating advanced technology NanoSilver that uses silver ions to halt and reverse the progress and growth of bacteria, fungi and germs into the environment.This new product line Sherwin Williams home is scientifically tested to act against the formation and growth of microorganisms harmful to health, especially Escherichia coli, which causes diarrhea in young children, and Staphylococcus aureus, which produces conjunctivitis disease with respiratory, inflammation of the nasal passages and contamination of the environment in general.

It is also a highly effective against mildew and mold in the home damp surfaces,sparing the cumbersome job of cleaning walls and ceilings of the presence of these unpleasant colonies of microorganisms.

THE Acrylic Latex High Length Bioprotect can be used both indoors and outside, forming a film resistant to weathering factors. Being a latex has good hiding power and performance it becomes a product for easy application and an incredible finish on all types of walls.

To apply, must complete the following application schema.

Surface Preparation:

1. - Remove loose or peeling paint, rust, dust or damaged material from the surface.

Two. - Escobillar the surface using water to remove debris such as grease or oil paint act as release agents and all kinds of dirt and then rinse and let dry.

Three. - Sand glossy surfaces with fine sandpaper, removing sanding dust that has adhered to the substrate.

April. - Repair cracks, holes and remove other elements present on the surface that may affect the application.

Application.

1. - Outdoor, we recommend starting by the largest area of ​​shade.

Two. - Remember that before applying, you should mix well the product to get the desired result.

Three. - If you decide to dilute, do not do it more so that 10% but could affect the adhesion of the paint and its properties.

April. - Remember that if you identify the presence of fungi, you must do a cleaning schedule before application using bleach diluted in water at a ratio of 1:2.